Features
- The Wall Connector allows you to connect four wall connectors to a single circuit with automated load management, giving vehicle owners peace of mind that they may charge multiple vehicles at home.
- Use a 100A single-phase circuit breaker to charge at the fastest speed. The circuit breaker rating on the Wall Connector can be changed from 15A to 100A.
- The Wall Connector will resume charging if a power outage occurs. If the charging cable is connected to the vehicle when power is restored, the lights flash and the device does not energize the charging cable for roughly 15 seconds to three minutes.
- The ground monitoring circuit in the Wall Connector checks for a safe connection and automatically recovers from faults, according to its documentation. It is not necessary to check manually or reset it.
Wall Connector can be used with Model S, Model 3 and Model X. It is compatible with Model Y, Model X, and Model X. It is capable of providing up 44 miles per hour of charging and up to 11.5 kW /48 amp output depending on the model.
This power sharing feature is great for households who need to charge multiple Teslas at once but don’t have enough power to run them all. This allows up to four Wall Connectors, which can share power from one circuit and still allow your vehicles to receive sufficient charge.
Wall Connector’s lightweight design allows for versatile, indoor or outdoor mounting.The charging access control gives you complete control over which cars can charge with your Wall Connector. The commissioning wizard allows you to restrict charging access without the need to use a physical lock device.
Connecting the Wall Connector with a Wi-Fi network allows it to receive firmware updates over-the-air, remote diagnostics access, and usage data tracking capability. To improve user experience and add new features, firmware updates will automatically be sent to the Wall Connector.
Wall Connector is compatible with most electrical systems. It can be used to adjust power levels for a variety of circuit breakers. This flexibility allows for installation in almost all homes, apartments, condos, and workplaces.
Chrissy –
It is a factory sealed box. I am very pleased with it.
This charger is essential if you own a car. The button on the handle opens the car’s charging port. Simply connect the device to your car and it will charge.
This device won’t work if you own a Tesla car or any other brand.
Adrian –
The goods arrived quickly and were authentic.
It’s amazing now that it’s installed.
I was installed by a master electrician, who explained that the installation was very easy.
I recommend that you hire an electrician who is knowledgeable and read all instructions carefully before installing. The instructions’ 21st page contains information about the settings for switches and the parameters of amp consumption.
Rodney –
It was 2 months old when there were no orders or reserves on the Tesla website. Although it was a bit more expensive than Tesla’s, it arrived within a few days.
This is the original TESLA device. The fork is not included in the device. It must be connected to a power chain. It charges at 80% of the nominal circuit breaker’s current.
It works so well, i think it would be a great idea to own a Tesla charger, even if the cars were Tesla.
Vincent B –
The factory sealed box contained the goods, which i recognized as the original manufacturer’s packaging.
Additionally, the goods were packaged at the factory and did not get damaged in transit.
Josh –
It was purchased to go with my Tesla Model Y.